Ortho Spray

The water/alcohol mist totally keeps dust down by binding the dust into a paste. You do have to clean off the patient's foot at the end of the treatment. The drill is virtually noise free. Your office will smell 'medical'. You debride more quickly because there is no heat at the bur tip.

The Ortho-Spray drill debrides nail and callus while cooling bur and patient tissue with a mist of distilled water and alcohol. The slender handpiece affords a confident grip and superior control of aggressive burs, allowing you to debride more patients every day. This drill will earn its keep over and over. Best of all is that patients prefer this 'painless' treatment and bring referrals to your clinic. Please specify if you want the "internal" reservoir or the "external" reservoir. The external reservoir must be removed for filling. It can therefore also be cleaned easily. The internal reservoir (top picture) is slightly smaller but can be replaced with a larger one as an option. If you use distilled water and a bit of medical grade alcohol then cleaning is really never needed.		..
Specifications: 110V, 60 Hz. Water reservoir accessible from the front. Expected life: 10 to 15 years. Bur speed: variable/reversible to 30,000 rpm with lots of torque. Drill ships with footswitch, fill bottle, cleaning tool and stainless steel bur. Warranty: 3 years parts and labour Trial period: 2 week trial guarantee with refund less shipping costs.		Options: Finger switch in rear of handpiece. You can also use the drill without footswitch. Larger internal reservoir. Carrying bag with shoulder strap. We stock all parts for the drills. Many parts are user replaceable. Service requirements: Every 3 to 4 years I'd like to check out the unit, put new grease in the handpiece and lubricate the compressor. Most users just run the drill until something goes wrong and then send it. That's OK too.