| The 424SGX060 is a very coarse bur with cross cut
grooves that remain clean even while debriding mycotic nails. It works
with dry or wet nails. It needs a steady hand and a light touch until
you are used to it. The cutting edge is straight so you know exactly
how deep you grind in the center of the nail. The SuperCoarse burs are sometimes used to debride
callus. The X and GX coarseness
are much safer. |
424X060
Super coarse 424SGX |
| The 425X is a rounded bur. It cuts a little
deeper in the center.
The 429X has a longer cutting edge than the 424X bur.
It is the most used carbide bur.
The 433X will thin down a nail from underneath the front of
the nail and cut away an incurvated nail.
|
 429X060 round 425X060 433X023 |
| The bristle bur is really fast on thick callus.
The bur consists of little pins of carbide that rip callus efficiently but
this bur will pull. Therefore you need to have good finger control of
the bur. Because the pins are all in one row you can clean this bur
easily with a wire brush. |
32119 is the order number of this bristle bur. |
